ICC-PRZ Smart Display Controller

Installation

The antenna feed from the CATV network connects to the ICC controller; an internal splitter separates the TV and control signals, and connects to the TV's antenna input, using the included cable. The unit does not require an external splitter, and provides less than 1.5 dB insertion loss in the signal path. The ICC-HE Head End controller communicates with the ICC2, sending data at 74.7 MHz (between channels 4 and 5), receiving data at 5.6MHz (below sub-channels), and will operate with RF levels from -25 to +35dBmV

© 2010 Contemporary Research Corporation.
Contemporary Research® is a registered trademark of Contemporary Research Corporation. All rights reserved.